Metloc, Providing Masonry & Stone Support Systems

Mail: info@metloc.com          Tel: +44 (0) 28 91 452 595

METLOC MAXIMUS MASONRY SUPPORT SYSTEM

THE MAXIMUS MASONRY SUPPORT

The METLOC MAXIMUS® Masonry Support System utilises patented technology to deliver a flexible non - welded solution for your project.

The system can be delivered fully assembled ready for fixing, while offering the flexibility of interchangeable brackets, allowing you to react to any cavity variations.

The system is primarily used in framed building to support the outer masonry / brickwork leaf at each or alternate floor levels.

The Maximus system is exceptionally versatile and can accommodate the majority of design variations typically encountered. The main frame, cavity and supported height will vary from project to project, and with the help of our technical support team, a bespoke system can be design specifically for your project.

In addition to the bespoke Metloc design service, a standard set of products has been developed to provide predetermined load carrying capacity. These are industry recognised standard loadings and are broadly based on storey heights of framed buildings.

RESOURCES
ML10
ML12
ML14

ENQUIRIES
For expert advice and technical support on this product contact us:
info@metloc.com
+44 (0) 28 91 452 595

CE MARKING

The CE marking on all of our products shows that they comply with the Construction Products Regulation and are safe to use. This regulation outlines the process for designing and marking the steel. Product manufacturing is in accordance with BS EN 1090.

STANDARD SYSTEMS

MAXIMUS® ML10

The ML10 off the shelf system is designed to carry a characteristic action (service load) of up to 10kN/m.

MAXIMUS® ML12

The ML12 off the shelf system is designed to carry a characteristic action (service load) of up to 12kN/m.

MAXIMUS® ML14

The ML14 off the shelf system is designed to carry a characteristic action (service load) of up to 14kN/m.

MAXIMUS® BESPOKE

For site situations where our standard ML10/12/14 systems will not suit the project, bespoke Metloc systems can be designed for loads in excess of 20kN/m and with cavities of up to 300mm or greater.

FLAT PACKED OR FULLY ASSEMBLED

Modular product that can be sent flat packed or assembled ready for installation.

CAVITY CLOSERS & THERMAL BREAKS

We offer an optional cavity closing plate for our Metloc system as well as non-compressible thermal breaks which can be used to reduce cold bridging as well as acting as shims.

ENQUIRIES

Interested in using our products? Contact us or fill in your
details below to see how we can provide technical support
and advice to help specify the right solution y our project.