MLR SS 0012 MLR SS 0018 MLR SS 0015 MLR SS 0030

METLOC MAXIMUS
STONE SUPPORT
SYSTEM

 

Resources

Enquiries

For expert advice and technical support on this product contact us:

info@metloc.com 
+44 (0) 28 91 452 595

CE MARKING

The CE marking on all of our products shows that they comply with the Construction Products Regulation and are safe to use. This regulation outlines the process for designing and marking the steel. Product manufacturing is in accordance with BS EN 1090.

HOW THE MAXIMUS SYSTEM WORKS

 

MAXIMUS ML3 & ML4 BRACKETS

 

ANGLE OPTIONS

 

BENEFITS OF THE STONE SUPPORT SYSTEM

Additional information about specifying the

correct product type goes here.

LOAD TABLES

CAVITY (mm)

100MM CLEAT

MAX LOAD (kN)

100MM CLEAT

MAX LOAD (kN)

3.1* 3.1*
Up to 100 3.1* 3.1* 3.1* 3.1*
3.1* 3.1* 3.1* 3.1* 3.1*
3.1* 3.1* 3.1* 3.1* 3.1*

NOTE

* Denotes where cleat capacity governs the design load

Denotes where smaller cleat size will give same capacity

FIXINGS

1No. Fischer FBN II 12/20 A4 Mechanical Anchor for each bracket based on un-cracked concrete – minimum 70mm embedment.

Minimum side edge distance of 120mm.

All concrete assumed to be minimum of Grade C35.

CAVITY (mm)

100MM CLEAT

MAX LOAD (kN)

100MM CLEAT

MAX LOAD (kN)

CAVITY (mm) CAVITY (mm)
Up to 100 3.1* 3.1* 3.1* 3.1*
3.1* 3.1* 3.1* 3.1* 3.1*
3.1* 3.1* 3.1* 3.1* 3.1*

NOTE

* Denotes where cleat capacity governs the design load

Denotes where smaller cleat size will give same capacity

FIXINGS

1No. Fischer FBN II 12/20 A4 Mechanical Anchor for each bracket based on un-cracked concrete – minimum 70mm embedment.

Minimum side edge distance of 120mm.

All concrete assumed to be minimum of Grade C35.

ENQUIRIES